| 风道式电加热器基本介绍 |
| 添加时间：2020/7/27 15:17:57 浏览次数： |
| 风道式电加热器基本介绍 Basic introduction of air duct electric heater 风道式电加热器主要用于风道中的空气加热，规格分为低温、中温、高温三种形式，在结构上的共同之处是采用钢板支撑电热管以减少电热管的振动，接线盒中都装有超温控制装置。在控制方面除装有超温保护外，还在风机与风道式电加热器之间加装联运装置，以确保电加热器起动必须在风机起动之后，在加热器前后加一差压装置，以防风机故障，风道式电加热器加热的气体压力一般不应超过0.3Kg/cm2，如需超过以上压力，可选用循环式电加热器；低温型加热器气体加热最高温度不超过160℃；中温型不超过260℃；高温型不超过500℃。 The air duct type electric heater is mainly used for air heating in the air duct. The specifications are divided into three forms: low temperature, medium temperature and high temperature. The common feature in the structure is that the steel plate is used to support the electric heating pipe to reduce the vibration of the electric heating pipe. The junction box is equipped with over temperature control device. In terms of control, in addition to the installation of over temperature protection, a combined transport device is also installed between the fan and the air duct type electric heater to ensure that the electric heater starts. After the fan starts, a differential pressure device is added before and after the heater to prevent fan failure. Generally, the gas pressure heated by the air duct type electric heater should not exceed 0.3kg/cm2. If the above pressure needs to be exceeded, the circulating electric heating can be selected The maximum gas heating temperature of low-temperature heater is not more than 160 ℃, that of medium temperature type is not more than 260 ℃, and that of high-temperature type is not more than 500 ℃. |
| 上一页 导热油加热炉特点 |
| 下一页 风道式电加热器 |
Copyright © 技术支持：遨游网络