导热油电加热器性能优点
性能优点
Performance advantages
1、能在较低的运行压力下(<0.5Mpa),获得较高的工作温度(350℃),降低了用热设备的受压等级,可提高系统的安全性。
1. Under lower operating pressure (< 0.5Mpa), higher working temperature (350 C) can be obtained, and the pressure level of heating equipment can be reduced, which can improve the safety of the system.
2、在加热均匀柔合,温度调节采用PID自整定智能控制,控温精度高(±1℃),可满足高工艺标准的严格要求。
2. Homogeneous and flexible heating, intelligent control of temperature adjustment using PID self-tuning, high temperature control accuracy (+1 C), can meet the strict requirements of high process standards.
3、体积小,占地少,可安装在用热设备附近,不需要设专人操作,可降低设备投资及运行费用,回收投资快。
3. It is small in size and occupies less land. It can be installed near the thermal equipment. It does not need special person to operate. It can reduce the investment and operation cost of the equipment and recover the investment quickly.
4、运行控制及安全监测装置齐全完备,升温过程全自动控制,操作简捷,安装方便。
4. Complete operation control and safety monitoring devices, automatic control of heating process, simple operation and convenient installation.
5、在闭路循环供热,热量损失小,节能效果显著,无环境污染,使用范围广。
5. In closed-circuit circulating heating, the heat loss is small, the energy-saving effect is remarkable, there is no environmental pollution, and the use range is wide.
6、具备有低温型(180℃),中温型(300℃),高温型(350℃),产品规格全,用户选择范围广。
6. It has low-temperature type (180 C), medium-temperature type (300 C), high-temperature type (350 C), complete product specifications, wide range of user choices.
注意事项
Matters needing attention
1、 [2] 导热油电加热器的操作人员,应经过导热油电加热器方面知识的培训,并经当地锅炉安全监察机构考核发证。
1. [2] Operators of heat-conducting oil-electric heaters shall be trained in knowledge of heat-conducting oil-electric heaters and certified by the local boiler safety supervision institution.
2、导热油电加热器使用单位,必须制订导热油电加热器操作规程。操作规程应包括导热油电加热器启动、运行、停炉、紧急停炉等操作方法和应注意事项。操作人员必须按操作规程进行操作。
2. Units that use heat-conducting oil electric heaters must formulate operating rules for heat-conducting oil electric heaters. Operating procedures should include the start-up, operation, shutdown and emergency shutdown of heat-conducting oil electric heater and other operating methods and matters needing attention. Operators must operate in accordance with the operating procedures.
3、导热油电加热器范围内的管道应采取保温措施,但法兰连接处不宜采用包覆措施。
3. Insulation measures should be taken for pipelines within the scope of heat conducting oil electric heater, but coating measures should not be adopted for flange connections.